2025 VALID 100% FREE HQT-4420–100% FREE EXAM PDF | HQT-4420 LATEST TEST ONLINE

2025 Valid 100% Free HQT-4420–100% Free Exam PDF | HQT-4420 Latest Test Online

2025 Valid 100% Free HQT-4420–100% Free Exam PDF | HQT-4420 Latest Test Online

Blog Article

Tags: Exam HQT-4420 PDF, HQT-4420 Latest Test Online, HQT-4420 Test Study Guide, HQT-4420 New Dumps Files, HQT-4420 Free Exam Dumps

Most of the HQT-4420 exam dumps on the platform are out of reach for most users due to their high price. Visit the Hitachi HQT-4420 exam dumps if you want to copyright Hitachi HQT-4420 Exam Questions at a good price. Start your Hitachi HQT-4420 exam preparation with our exam practice questions.

Hitachi HQT-4420 Exam is a highly respected certification in the IT industry, and passing the exam demonstrates a high level of expertise in the installation and configuration of Hitachi Vantara Content Platform solutions. Certified professionals are highly sought after by organizations that use Hitachi Vantara Content Platform solutions, and they can expect to command higher salaries and better job prospects.

>> Exam HQT-4420 PDF <<

Latest Exam HQT-4420 PDF - Pass HQT-4420 Once - Effective HQT-4420 Latest Test Online

Our HQT-4420 exam questions are supposed to help you pass the exam smoothly. Don't worry about channels to the best HQT-4420 study materials so many exam candidates admire our generosity of offering help for them. Up to now, no one has ever challenged our leading position of this area. The existence of our HQT-4420 learning guide is regarded as in favor of your efficiency of passing the exam.

Hitachi HQT-4420 Certification Exam is a globally recognized credential that is highly valued in the IT industry. It is a prerequisite for advanced certifications in the Hitachi Content Platform, such as the Hitachi Vantara Certified Specialist - Content Platform Administration or the Hitachi Vantara Certified Expert - Content Platform Implementation. Hitachi Vantara Qualified Professional - Content Platform Installation certification can lead to better job opportunities, higher salaries, and increased credibility in the storage and data management domain.

Hitachi Vantara Qualified Professional - Content Platform Installation Sample Questions (Q29-Q34):

NEW QUESTION # 29
Your customer has tested a new HCP G10 with an S10 node and they now want to re-install the S10 node before turning it into production.
What are three requirements? (Choose three.)

  • A. The first-time setup wizard must be completed on the S10 node
  • B. The S10 node must be retired in the HCP G10 System Management Console
  • C. The S10 node must be disconnected from the HCP G10 cluster
  • D. The Genesis build must be manually started on the S10 node
  • E. The S10 node must boot the installation package from the USB drive

Answer: B,C,E

Explanation:
Before re-installing the S10 node for production:
The S10 node must be retired in the HCP G10 System Management Console: This step ensures the S10 node is correctly removed from the cluster management to avoid conflicts during re-installation.
The S10 node must be disconnected from the HCP G10 cluster: Disconnecting the node from the cluster prevents any unintended interactions with the current configuration.
The S10 node must boot the installation package from the USB drive: This is required to load the new installation environment onto the S10 node, ensuring a clean and fresh installation.
Hitachi Vantara Content Platform Installation Reference:
These steps are necessary to prepare the S10 node for reinstallation without causing disruptions to the existing HCP G10 cluster operations.


NEW QUESTION # 30
You are installing an HCP G10 and are now setting the front-end connectivity. The customer has provided you with IP addresses for their network for each node.
Which two actions should be performed on each node as part of the OS installation? (Choose two.)

  • A. Set the NTP IP address(es)
  • B. Set the front-end IP address
  • C. Set the gateway IP address
  • D. Set the BMC IP address

Answer: B,D

Explanation:
When installing an HCP G10 and setting up front-end connectivity, two critical actions must be performed on each node:
Set the BMC IP Address (A): The Baseboard Management Controller (BMC) IP address must be set to allow for remote management and monitoring of each node. This is crucial for out-of-band management, especially in large data center environments where physical access to servers may be limited. Configuring the BMC IP address is typically done during the initial setup of the operating system on the HCP node.
Set the Front-End IP Address (C): The front-end IP address, which is used for client network traffic, must be configured as provided by the customer. This IP address allows each node to communicate with the client network, and it is a key part of the configuration during OS installation.
These configurations are detailed in the "HCP G10 Network Configuration Guide" and the "HCP G10 Installation and Configuration Manual," which provide step-by-step procedures for setting up both the BMC and front-end IP addresses.


NEW QUESTION # 31
What is required to configure host group security on a new HCP G10 with attached storage?

  • A. World Wide Port Name
  • B. MAC address of the back-end NICs
  • C. MAC address of the front-end NICs
  • D. World Wide Node Name

Answer: B

Explanation:
To configure host group security on a new HCP G10 with attached storage, the World Wide Port Name (WWPN) is required. The WWPN is a unique identifier for each Fibre Channel port in a storage area network (SAN) environment. It is used to configure access control and define which hosts can communicate with specific storage resources. This setting ensures that only authorized hosts can access the storage, enhancing the overall security of the HCP system. This requirement is documented in the "Hitachi Vantara HCP G10 Storage Configuration Guide."


NEW QUESTION # 32
You are installing an HCP G10 and are setting up the BIOS.
What are two requirements when configuring in the BIOS? (Choose two.)

  • A. Fast boot should be enabled
  • B. The BMC IP address, net mask and gateway should be set
  • C. PXE should be disabled for all interfaces
  • D. The OS virtual disk should be selected as boot device

Answer: B,D

Explanation:
When setting up the BIOS for an HCP G10, two key requirements are:
The BMC (Baseboard Management Controller) IP address, net mask, and gateway should be set: This configuration enables remote management and monitoring of the HCP G10 node, allowing administrators to manage the node even when the operating system is not running.
The OS virtual disk should be selected as the boot device: This ensures that the node boots from the correct storage device where the operating system is installed, which is essential for the system to operate correctly.
Hitachi Vantara Content Platform Installation Reference:
Proper configuration in the BIOS is critical for managing and booting the HCP G10 node effectively, as outlined in the installation instructions.


NEW QUESTION # 33
Which combination of trays allows a HCP S31 to be configured to its maximum capacity?

  • A. 1 x 4U100 and 1 x 4U106
  • B. 1 x 4U100 and 2 x 4U106
  • C. 1 x 4U106 and 2 x 4U100
  • D. 1 x 4U100 and 8 x 4U106

Answer: D

Explanation:
To configure an HCP S31 to its maximum capacity, the combination of 1 x 4U100 and 8 x 4U106 trays is used. The 4U100 is a 4U enclosure that can hold 100 drives, while the 4U106 is another 4U enclosure that holds 106 drives. This combination allows for the highest possible storage density and capacity, leveraging the different tray sizes to maximize the total available storage.
Hitachi Vantara Content Platform Installation Reference:
The configuration maximizes the storage capacity supported by the HCP S31 system, as specified in the installation and hardware configuration guidelines.


NEW QUESTION # 34
......

HQT-4420 Latest Test Online: https://www.updatedumps.com/Hitachi/HQT-4420-updated-exam-dumps.html

Report this page